DOA AMP Rapid Test with CE certificate Urine Test Device
| Product Name | MOP One Step Morphine Test |
| Formats | Strip(3mm)Device(4mm) Multi panel or Cup |
| Place of Origen | China |
| Specimen | Urine |
| Read Time | 5 minutes |
| Shelf life | 2 years |
| Package | 25 device/Box or 50 strip/Box |
| Storage | 2℃-30℃ |
INTENDED USE
The One Step Amphetamine Test is a lateral flow chromatographic
immunoassay for the detection of Amphetamine in human urine at the
cut-off concentration of 1000 ng/ml. This assay provides only a
qualitative, preliminary analytical test result. A more specific
alternate chemical method must be used in order to obtain a
confirmed analytical result. Gas chromatography/mass spectrometry
(GC/MS) is the preferred confirmatory method. Clinical
consideration and professional judgment should be applied to any
drug of abuse test result, particularly when preliminary positive
results are used.
TEST PROCEDURE
Test must be in room temperature (15ºC to 30ºC)
Device:
- Remove a testing device from the foil pouch by tearing at the notch
and place it on a level surface.
- Holding a sample dropper vertically, add exactly four drops of the
urine specimen to the sample well.
- Read results at 5 minutes. Do not read after 10 minutes.
Strip:
- Remove the test strip from the sealed pouch and use it as soon as
possible.
- With arrows pointing toward the urine specimen, immerse the test strip vertically in the urine specimen for at
least 10-15 seconds. Do not pass the maximum line (MAX) on the test strip when
immersing the strip.
- Place the test strip on a non-absorbent flat surface, start the
timer and wait for the red line(s) to appear.
- The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
INTERPRETATION OF RESULTS
Positive (+)
A rose-pink band is visible in the control region. No color band
appears in the test region. This positive result indicates that the
Amphetamine concentration is equal to or higher than the detection
limit(1000 ng/ml).
Negative (-)
A rose-pink band is visible in the control region and the test
region. This negative result indicates that the Amphetamine
concentration is zero or below the detection limit(1000 ng/ml).
Invalid
If a color band is not visible in the control region or a color
band is only visible in the test region, the test is invalid.
Another test should be run to re-evaluate the specimen. If test
still fails, please contact the distributor or the store, where you
bought the product, with the lot number.
Note: There is no meaning attributed to line color intensity or width.
